The AnkaScrew™ Masonry Screw is both fast and easy to install as it simply screws into a pre-drilled hole.
The AnkaScrew™ Masonry Screw is even faster and easier to remove. It simply screws out leaving an empty hole with no protruding metal parts to grind off.
The AnkaScrew™ Masonry Screw is ideal for close-to-edge and close-to-anchor installation as its self-tapping, rotation setting method of installation is not subject to any expansion pressure, therefore does not burst the substrate.
TRADES & APPLICATIONS
Light duty anchoring
Hanging items into concrete/Masonry
1.Drill or core a hole to the recommended diameter and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum. 2.Insert the AnkaScrew™ Masonry Screw through the fixture and screw it into the hole with supplied Torx bit, using slight pressure until the self-tapping action begins. 3.Tighten the AnkaScrew™ Masonry Screw until the fixture is held firm. If resistance is experienced when tightening, unscrew the anchor one turn and re-tighten. Ensure that you do not over tighten.