WallMate™ Plasterboard Anchors
|
The WallMate™ is the original self drilling plasterboard anchor. Available in nylon or zinc, the WallMate™ would probably be the quickest and easiest plasterboard anchor to install and remove. |
FEATURES & BENEFITS
Both versions of the WallMate™ feature an effective drill point for easy penetration of plasterboard and fast installation. If a long screw is used, this point will break away so as not to restrict achievement of a firm fix.
The anchor’s screw thread profile is designed for efficient cutting and positive grip.
Both the screw and the WallMate™ can be easily removed without losing the anchor inside the cavity.
The low profile head allows for flush fixing.
|
|
INSTALLATION GUIDE
1. Insert the point of a #2 Philips Head screwdriver into the recess of the WallMate™, place the drill point against the wall, lightly piercing the face paper, and screw the anchor into the plasterboard until the head is flush with the surface.
2. Place the fixture over the anchor, insert the appropriate gauge screw through the fixture, into the head of the WallMate™ and tighten the fixture in place.

|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|