DynaBolt™ Plus Sleeve Anchors
|
|
The DynaBolt™ Plus Sleeve Anchor is a medium duty, torque controlled, expansion anchor, with an integrated pull-down section, designed for medium duty anchoring of timber and steel fixtures to concrete, brick or block. The DynaBolt™ Plus is available in a variety of different head styles and finishes. |
|
SPECIFICATIONS
Material
|
Carbon Steel, Stainless Steel 316 (A4) |
| Corrosion Protection |
Zinc Plating, Hot Dipped Galvanising |
| Head Styles |
Hex Nut, Hex Bolt, Countersunk/Flat Head,
Round Head, Hook, Eye, Tie Wire |
| Fixing Method |
Through Fixture |
| Setting Method |
Torque Controlled |
| Anchoring Method |
Expansion |
| Thread Diameters |
M4.5, M6, M8, M10, M12, M16 |
| Drilled Hole Diameters |
6mm, 8mm, 10mm, 12mm, 16mm, 20mm |
| Anchor Lengths |
26mm, 32mm, 34mm, 38mm, 40mm, 41mm, 45mm, 49mm, 55mm, 57mm, 60mm, 62mm, 65mm, 66mm, 70mm, 75mm, 76mm, 80mm, 81mm, 85mm, 92mm, 98mm, 100mm, 103mm, 105mm, 106mm, 110mm, 113mm, 124mm, 125mm, 126mm, 140mm, 157mm |
| Maximum Fixture Thickness’ |
3mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 32mm, 35mm, 45mm, 49mm, 50mm, 55mm, 60mm, 65mm, 70mm, 80mm
|
| Indicative Working Loads in 32MPa Concrete* |
Max Tensile 2.7kN -16.6kN
Max Shear 2.5kN - 15.6kN
|
| Substrates |
Concrete, Solid Brick, Solid Block,
Hollow Brick, Hollow Block, Hollow Slab
|
* Refer to load table under
"Technical Data & Documents" tab |
|
|
|
|
FEATURES & BENEFITS
- The DynaBolt™ Plus patented expansion sleeve closes gaps of up to 5mm, pulling down on the fixture to induce clamp load and provide improved security.
- The DynaBolt™ Plus is a fully assembled through fixture anchor. Therefore, assembly, marking out and re-positioning of fixtures is eliminated making installation fast and easy.
- The choice of multiple head styles makes the DynaBolt™ Plus a versatile anchor for a variety of different applications.
|
|
|
INSTALLATION GUIDE
|
1.Drill or core a hole to the recommended diameter and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
2.Insert the DynaBolt™ Plus through the fixture and drive with a hammer until the washer contacts the fixture.
3.Tighten the DynaBolt™ Plus, allowing the sleeve to twist and pull down the fixture firmly onto the substrate. For optimum performance, a torque wrench should be used.
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
Hex Nut Hot Dipped Galvanised
Hex Nut Stainless Steel Grade AISI 316 (A4)
Hex Bolt Stainless Steel Grade AISI 316 (A4)
Countersunk Head Zinc Plated
Tie Wire Bolt Zinc Plated
|
|
