DynaBolt™ Decorative Post Heads provide added flexibility to DynaBolt™ Plus Sleeve Anchors, providing a range of alternative head styles for different applications.

1.Drill or core a hole to the recommended diameter and depth using the fixture as a template.  Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum. 
2.Insert the DynaBolt™ Plus through the fixture and drive with a hammer until the washer contacts the fixture. 
3.Tighten the DynaBolt™ Plus, allowing the sleeve to twist and pull down the fixture firmly onto the substrate. For optimum performance, a torque wrench should be used.