AnkaScrew™ Xtrem™
|
|
Ramset’s AnkaScrew Xtrem is a ETA certified, seismic and fire rate heavy duty screw-in anchor. This removable anchor is well suited to close-to-edge or close-to-anchor fixing as it does not expand and burst the surrounding substrate. |
|
SPECIFICATIONS
|
Approvals
|
European Technical Assessment (ETA), Seismic, Fire
|
|
Material
|
High Carbon Steel
|
|
Corrosion Protection
|
Zinc Plating
|
|
Head Styles
|
Flanged Hex
|
|
Fixing Method
|
Through Fixture
|
|
Setting Method
|
Rotation
|
|
Anchoring Method
|
Thread Forming
|
|
Drilled Hole Diameters
|
6mm, 8mm, 10mm, 12mm
|
|
Anchor Lengths
|
50mm, 60mm, 80mm, 100mm, 110mm, 150mm
|
|
Maximum Fixture Thickness
|
Up to 85mm – Anchor length dependant
|
|
Substrates
|
Concrete, Hollow Core, Solid Brick, Solid Block, Hollow Block, Hollow Slab, Hollow Brick
|
|
Compliance
|
AS5216, AS1170.4, EN1992-4, NZS3101 A3, ETAG001, TR045
|
|
|
|
FEATURES & BENEFITS
- High thread engagement increases clamp force and holding capacity over a wide range of loading.
- The AnkaScrew™ Xtrem™ is ideal for close-to-edge and close-to-anchor installation as its self-tapping, rotation setting method of installation is subject to low expansion pressure, therefore does not burst the substrate
- For concrete, hollow core, brick & block (solid & hollow).
- The AnkaScrew™ Xtrem™ thread design provides clearance for rapid removal of material and reduces jamming.
- The AnkaScrew™ Xtrem™ is 100% removable.
- The AnkaScrew™ Xtrem™ is both fast and easy to install as it simply screws into a pre-drilled hole.
- Available in Zinc plating
- Suitable for installation with impact wrenches
|
|
|
INSTALLATION GUIDE
|
  
INSTALLATION GUIDE
- Drill or core a hole to the recommended diameter and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
- Insert the AnkaScrew™ Xtrem through the fixture and screw it into the hole with either a socket wrench or an impact wrench (with an impact socket) using slight pressure until the self-tapping action begins.
- Tighten the AnkaScrew™ Xtrem™ until the fixture is held firm or to installation torque on the product label.
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
|
|
