Hi-Seal™ PU+
|
Hi-Seal PU+ is a high performance polyurathane sealant that provides a tough, elastic, UV resistant and waterproof seal in exterior joints in concrete, brick and concrete block construction.
Approvals
AS4020 Water Potable
ISO 11600- Class F-25LM
Ministry of Agriculture and Fisheries |
SPECIFICATIONS
Appearance |
Non sag smooth thixotropic paste Joinery 4 |
Chemical Type |
Polyurethane |
Specific Gravity |
1.2 |
Application Temperature |
+5°C to + 35°C |
Tool Working Time |
30 minutes at 20°C |
Tack Free Time |
6 to 12 hours |
Cure Rate |
2 mm per 24 hour period |
Max. Joint Movement |
± 25% |
Max. Joint Width |
50mm Installation |
Elongation at Break |
900% |
Cure Hardness |
Shore A 30 |
Tensile Strength |
1.3 N / mm2 |
Service Temperature |
-40°C to + 70°C |
Substrates |
Concrete and Cement, Brick, Concrete Block, Aluminium, Ceramic Tiles, Laminate, Stainless Steel, Galvanised Steel, Timber, Particleboard, MDF, Plywood, Plasterboard |
|
|
FEATURES & BENEFITS
• UV and weather resistant - Excellent resistance to aging and weathering - Permanently flexible - Will not shrink or crack • Thixotropic - no sagging or running • Excellent flexibility - joint movement ±25% • Acoustic rated • Suitable for contact with drinking water - AS4020-1994 • Non-corrosive neutral cure • Paintable with acrylic based surface coatings • AS1157-1972 fungus and mildew resistant
|
|
INSTALLATION GUIDE
Refer to the Technical Data Sheet and MSDS for further detailed installation instructions and precautions.
- Mask around joints before applying sealant.
- For maximum performance on porous surfaces use Ramset N49 Primer / N40 primer is recommended for non-porous surfaces
- Dispense HiSeal™ into joint. Tool sealant for neat finish.
- Use tool with a convex profile.
- Tooling Time: within 30 minutes of application.
- Remove masking tape before sealant skins (about 30 minutes).
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
|
|