Hollow Brick and Block Anchoring Accessories
|
Use with ChemSet™ 101 and UltraFix™ Plus to anchor threaded studs into hollow brick and block Forms a solid plug of adhesive in the brick or block cavity to provide secure anchoring point Durable nylon sleeves ideal for 3 hole brick and hollow concrete block Fine Metal Mesh Sleeves ideal for 10 hole brick |
SPECIFICATIONS
Typical Properties
|
Nylon Sleeve |
Wire Mesh Sleeve |
For Thread Size |
Overall Length (mm) |
Nominal Diameter (mm) |
Overall Length (mm) |
Nominal Diameter (mm) |
M6 |
- |
- |
1000 |
12.5 |
M8 |
64 |
12 |
1000 |
12.5 |
M10 |
64 |
14 |
1000 |
15.0 |
M12 |
64 |
16 |
1000 |
15.0 |
M16 |
- |
- |
1000 |
20.5 |
Substrates |
Wire Cut Extruded Clay Brick, Hollow Concrete Block |
|
|
FEATURES & BENEFITS
- Strong, firm installation
- Tight clamping of fixture
- No expansion stress on brick and block when tightened
|
|
INSTALLATION GUIDE
1. Drill hole to specified diameter in brick or block using a masonry drill bit 2. Brush and blow dust out of holes 3. Cut wire mesh sleeves to length nominated in table below and fold or twist one end to close it 4. Insert nylon or wire mesh sleeve into hole 5. Insert ChemSet 101 or Ultrafix™ Plus mixing nozzle into sleeve and dispense adhesive, withdrawing nozzle as it fills 6. Insert threaded rod or stud in to sleeve 7. Allow adhesive to cure before loading
Refer to Technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed installation instructions


|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details