Max Tensile 3.4kN - 32.5kN Max Shear 2.8kN - 27.3kN
* Refer to load table under "Technical Data & Documents" tab
FEATURES & BENEFITS
The TruBolt™ diameter equals the required hole diameter providing maximum shear capacity for hole size and making drill bit selection simple. Its cold forged construction ensures superior strength and reliability.
The anchor design ensures maximum expansion of the sleeve and pull-down on the fixture. These actions are both further assisted by the application of load.
The anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during installation.
Drill or core a hole to the recommended diameter (same as the TruBolt™) and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
Insert the anchor through the fixture and drive with a hammer until the washer contacts the fixture.
Tighten the nut with a torque wrench to the specified assembly torque.